80i-110s AC/DC Current Clamp
Call
ติดต่อสอบถาม
รายละเอียดสินค้า

AC/DC Current clamp

The 80I-110s is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter PM9081/001.

  • Current Range: 0.1 to 100A DC or 0.1 to 70A AC
  • Basic Accuracy (DC to 1kHz):
    100mV/A setting: 50mA to 10A +/- 3% of reading + 50mA
    10mV/A setting: 50mA to 40A +/- 4% of reading + 50mA
    40A to 80A +/- 12% of reading + 50mA
    80 to 100A +/- 15% of reading
  • Output Signal: 10A range: 100mV/A | 100A range: 10mV/A
  • Bandwidth: 1Hz to 20kHz
  • Working Voltage: 600V AC rms
  • Maximum Conductor Size: 11.8 mm (.46 inch) diameter
  • Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V

Download : Datasheet

สินค้าที่เกี่ยวข้อง
Fluke i3000 Flex AC Current Clamp, 4 Pack
Call
The i3000s Flex is an ac current clamp utilizing the Rogowski principle. It can be used to measure currents up to 3000 A when used in conjunction with oscilloscopes, recorders or data loggers. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas.   Three ranges: 30 A, 300 A & 300...
i3000s Flex-24 AC Current Clamp
Call
Very High AC Current Clamp Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools. The i3000s is a clamp-on AC Current Clamp for use with oscilloscopes and multimeters with banana input using the supplied Dual Banana to BNC Adapter. The clamp is optimized for measurement on power distribution systems.   Do...
i6000s-24 Flex AC Current Probe
Call
The i6000sflex is an AC current probe utilising the Rogowski principle. It can be used to measure currents up to 6000A when used in conjunction with oscilloscopes, recorders or data loggers. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas.   Download : Datasheet
i5S AC Current Clamp
Call
Expand the use of your Fluke 430 series power quality tool or ScopeMeter test tool with this 5 A ac current clamp, specially configured to provide good accuracy at low levels e.g. while taking measurements on secondary current transformers. Low level current clamp measures up to 5 A ac Compact shape makes transporting and storing conven...
i800 AC Current Clamp Probe
Call
Key Features:  Measures AC current from 100mA to 800 A rms 30 Hz to 10 kHz frequency range CAT III 600 V rating Accepts up to 54 mm (2.1 in) diameter conductor size 1000:1 conversion factor for easy calculation Rugged positive action design   Download : Datasheet
i200 AC Current Clamp
Call
Companion to a DMM for measuring up to 200 A AC 1 mA per Amp output guarantees easy reading on you meter Take accurate current readings without breaking the circuit Max. conductor Ø 20 mm CAT III 600 V safety rating Download : Datasheet
i400s AC Current Clamp
Call
High safety AC Current Clamp with BNC output Companion to your scope or power quality meter to measure up to 400 A AC Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating Specially designed to offer maximum utility in a compact shape Take accurate current readings without breaking the circuit Soft non-slippery over...